High/low current separation bracket
- Physical separation – Defines the routing areas for power and data cables within the SH1 trunking.
- Snap-in installation – No screws or adhesive required for the flange itself.
- Length: 150 cm – To be cut to the required length of the run if necessary.
28,32 €
- Free of Charge
- Immediate response
- 100% secure
In stock - Ready to be shipped
150 cm — Exclusively compatible with SH1 profile
Organize the routing of your cables in the EUBIQ SH1 cable duct with this 150 cm separation barrier. It creates a physical separation between the cable routing areas for power cables and data cables.
Two wiring areas in the SH1 profile
Physical separation
The barrier helps define the cable routing areas inside the SH1 duct.
Organized routing
Power cables and signal cables have separate routes, for a clearer installation.
Accessory designed for the SH1
Its shape is adapted to this EUBIQ profile. Check the reference of your duct before ordering.
EUBIQ barrier specifications
Adjust to the useful length of the route if necessary.
Designed specifically for the EUBIQ SH1 duct.
Installation in 5 steps
Prepare your duct
Check the mounting of the SH1 profile and prepare the installation area according to the system documentation. Any work on the electrical installation must be carried out when de-energized by a person qualified in electricity.
Adjust the length if necessary
For a section shorter than 150 cm, measure the useful length then adjust the barrier with a suitable tool. Hold the piece, follow the tool's safety instructions and deburr the cut.
Insert the barrier
Position it in the designated location of the SH1 profile, in accordance with the system documentation, to define two routing areas.
Distribute the cables
Organize the power cables and signal cables on either side of the separation, according to the requirements applicable to the installation.
Check then close
Check the positioning of the barrier and the cables before closing the profile with the appropriate elements.
For which projects?
Professional premises
Organization of cabling in the SH1 routes of offices, workstations and professional premises.
Residential developments
Organized routing of power and data cables in home SH1 installations.
Technical specifications
| Characteristic | Value |
|---|---|
| Brand | EUBIQ |
| Length | 150 cm |
| Dimensions (L × W × H) | 150 × 2 × 1 cm |
| Indicated weight | 150 g |
| Compatibility | Exclusively SH1 profile |
| Use | Power / low-voltage separation |
| Installation | Snap-in into the profile |
Frequently asked questions
What length is supplied?
The barrier measures 150 cm. Its dimensions are 150 × 2 × 1 cm.
Can the length be adjusted?
Yes. For a section shorter than 150 cm, measure the required length then make a clean cut with a suitable tool, following its safety instructions. Deburr before installation.
Is it compatible with other profiles?
This barrier is designed exclusively for the EUBIQ SH1 profile. For another model, check the reference of the corresponding separator.
How is the barrier installed?
By snapping it into the designated location of the SH1 profile, without screws or glue for the barrier itself. An eventual cut requires a suitable tool.
Is the barrier sufficient to validate the installation?
No. This accessory defines the routing areas in the duct. The entire cabling and its implementation must still be checked by a person qualified in electricity.
Important note: the barrier is a physical separation accessory. It does not constitute a certification of conformity of the installation, nor a guarantee of absence of interference or compartment sealing.
An organized SH1 route, with distinct wiring areas.
EUBIQ separation barrier · Length 150 cm · SH1 profile
| Characteristic | Value |
|---|---|
| Finishing | Brushed aluminum |
| Attachment type | Surface-mounted |
| Brand | EUBIQ |
| Reference | 5011-0300-0533 |
FAQ6 Questions
FAQ – EUBIQ high/low voltage separation bracket for SH1 profile
What length is supplied?
The bracket measures 150 cm. Its dimensions are 150 × 2 × 1 cm.
What is its function?
It creates a physical separation between the power cable and data cable routing areas in the SH1 trunking.
Is it compatible with all EUBIQ profiles?
No. It is designed exclusively for the SH1 profile. For another model, check the reference of the suitable separator.
Can it be cut to a length shorter than 150 cm?
Yes. Measure the required length, hold the piece in place and use a suitable tool while following its safety instructions. Make a clean cut and deburr before installation.
How is the bracket installed?
It is inserted into the designated slot in the SH1 profile, without screws or glue for the bracket itself. Any necessary cutting requires a suitable tool. Follow the system's installation documentation.
Is the bracket sufficient to validate the installation?
No. It is a physical separation accessory, not a certification of the overall assembly's compliance. The wiring and its implementation must be checked by a qualified electrical professional. Any work on the electrical installation must be carried out when the power is off.
Additional articles
WHAT OUR CLIENTS SAY ABOUT US
Discover below the reviews left by our hundreds of satisfied customers. These reviews come from verified buyers, and are controlled and verified by Judge.me, acting as a trusted third party between Eubiqeurope and its customers.
Rien à dire
Rapide efficace.
Prise que nous connaissons, pratique et fiable
Matériel très bien emballé, facile de pose. Livraison annoncée sous 8 jours mais livré en 4. Très content de ma commande.
Entièrement satisfait de ces produits, livraison rapide, montage facile.
De mme que pour le rail, jolie prise facile d'utilisation qu'on peut activer ou dsactiver
Excellente qualit du matriel en alu bross, facile monter. j'en suis trs content
10sur10.
Parfait
Parfait
Produit de très bonne qualité. La prise de courant avec led bleu apporte une très belle touche de modernité.
Produit de trs bonne qualit
La prise de courant avec led bleu apporte une trs belle touche de modernit
Ravis que la marque ait reprise la vente des goulottes! Un rsultat quasi parfait! Bricoleur amateur, seul conseil pour un ajustement parfait, un trs lger ponage des bords au papier sec 600 pour liminer l'bavurage
Une notice d'installation claire et simple mettre en oeuvre
Are you a professional ?
Electrician, fitter, furniture maker, kitchen designer...Apply for your professional account now to benefit from your conditions.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.