SH1 - Aluminium chute
- Same profile as standard SH1 tracks – A bare-bones solution to build and customize your installation.
- Custom lengths and room-specific layouts – Design the layout with the appropriate corners and connectors.
- Electrify only the useful areas – Combine SFC3 segments with cut-to-size SFC2D end caps to achieve the desired length.
86,89 €
- Free of Charge
- Immediate response
- 100% secure
In stock - Ready to be shipped
Choose your lengths and the areas to electrify
The SH1 trackway uses the same profile as the SH1 rails sold in 60, 80, 100, and 120 cm lengths. The difference: you design your own installation. Create a custom length, a corner return, or even a room perimeter trackway, electrifying only the useful areas with SFC3 segments and completing the other sections with SFC2D cut to the required length.
Standard SH1 rail or customizable SH1 trackway?
The same profile, two ways to prepare your project.
SH1 rails in standard lengths
SH1 rails are available in 60, 80, 100, and 120 cm lengths. Choose this solution when one of these lengths matches your layout.
Customizable SH1 trackway
Supplied bare in a 150 cm length that can be cut to size, the trackway allows you to customize the path, the final length, and the distribution of electrified areas. The components required for your configuration must be selected separately.
Design the installation you need
Electrify only certain areas
Position the SFC3 electrical segments where you want to use your EUBIQ outlets. It is not necessary to electrify the entire length of the installation.
Adjust the length with SFC2D
Complete the SFC3 segments with SFC2D blanking sections. The SFC2D can be cut to fill the non-electrified sections and achieve the desired final length.
Create returns and corners
Design a path suited to the room by selecting the necessary corners and connectors, rather than being limited to a standard straight length.
Create a room perimeter trackway
Run the trackway around the room and provide electrified areas only at useful locations: near a desk, cabinet, or workstation.
How to combine SFC3, SFC2D, and DS4?
| Component | Role in your installation |
|---|---|
| SH1 trackway | The aluminum profile that forms the path of your installation. |
| SFC3 electrical segment | Creates the electrified areas intended to receive EUBIQ outlets. |
| SFC2D blanking section | Completes the non-electrified sections. It can be cut to adjust the overall length. |
| DS4 for RJ45 | Allows RJ45 outlets to be installed at a fixed location between two SFC3 segments or at the end of the installation, instead of a section of SFC2D. Once installed, these RJ45 outlets cannot be moved along the track. |
| Corners and connectors | Allow you to create changes in direction and junctions in the path. |
| End caps | Close the ends of the trackway for a neat finish. |
Example layout: along a long wall, provide an SFC3 area at the desk, another near a cabinet, then complete the intermediate sections with SFC2D. The path remains continuous, but only the chosen areas are electrified.
SH1 profile specifications
Cable management and accessories
High-voltage and low-voltage wiring
The separation bracket creates two distinct compartments. The upper compartment can accommodate low-voltage cables, such as Ethernet.
Fixed RJ45 connections via DS4
RJ45 outlets are installed via DS4, between two SFC3 segments or at the end of the installation, instead of a section of SFC2D. They remain fixed and cannot be moved along the track. Plan their location when designing your installation.
Kitchen accessories
A groove under the profile allows bars or hooks to be clipped on to hang your utensils.
To be assembled separately: SFC3 segments, SFC2D blanking sections, DS4 for RJ45 outlets, corners, connectors, end caps, separation bracket, outlets, and other accessories according to your project. The bare trackway is not a pre-electrified rail.
Prepare your custom installation
Map out the path
Measure the lengths and changes in direction: straight section, corner return, or room perimeter trackway.
Identify the areas to electrify
Choose the locations of the SFC3 segments based on the devices you want to power. For RJ45 outlets, plan DS4 at fixed locations between two SFC3 segments or at the end of the installation, instead of a section of SFC2D.
Complete with SFC2D
Provide blanking sections for the non-electrified sections and cut them to achieve the desired final length.
Prepare the cuts and mounting
The aluminum trackway can be cut with a hacksaw. For a more professional cut, use a circular saw equipped with a blade suitable for aluminum. Secure the profile, follow the tool's safety instructions, and deburr the edges after cutting. Choose fasteners suitable for the mounting surface.
Assemble and connect
Follow the documentation for the various components for assembly and connection. The electrical installation must be carried out by a qualified electrician.
Frequently asked questions
Is the SH1 trackway different from the profile of the standard SH1 rails?
No, it uses the same profile as the SH1 rails sold in 60, 80, 100, and 120 cm lengths. The difference lies in the configuration: the bare trackway allows you to design the path and electrified areas according to your project.
Should the entire length be electrified?
No. Use the SFC3 segments at the locations where you need outlets and complete the other sections with SFC2D blanking sections.
How are RJ45 outlets installed?
RJ45 outlets are installed via DS4, between two SFC3 segments or at the end of the installation, instead of a section of SFC2D. They remain fixed and cannot be moved along the track.
How do you achieve a precise length?
Adapt the length of the trackway to your project, then complete the SFC3 segments with cut SFC2D to achieve the desired length. Do not confuse adjusting the blanking section with cutting the electrical segment.
Can you run it around a room?
Yes. The customizable solution allows you to create a room perimeter trackway with the necessary corners and connectors, electrifying only certain areas.
Is the black finish available for this product?
No. The trackway presented here is brushed aluminum.
Additional information
The SH1 profile, to your measure.
Design the path, choose your SFC3 areas, and adjust the SFC2D sections to your installation.
| Characteristic | Value |
|---|---|
| Finishing | Brushed aluminum |
| Attachment type | Surface-mounted |
| Available lengths | 150 cm |
| Brand | EUBIQ |
| Reference | 5011-0807-0015 |
FAQ9 Questions
FAQ – SH1 customizable track
How does it relate to the 60, 80, 100 and 120 cm SH1 tracks?
The SH1 track uses the same profile as these standard tracks. It is supplied bare and allows you to create your own installation by choosing the electrified areas and the final length.
How do you create a custom length?
Adapt the length of the track to your layout, then combine SFC3 electrical segments with SFC2D blanking plates. The SFC2D can be cut to complete the non-electrified sections and achieve the desired length.
Can you create a room perimeter?
Yes. With the necessary angles and connectors, the track allows you to create a layout around the room. You can electrify only certain areas with SFC3 segments and complete the other sections with SFC2D.
What length and finish are offered here?
This product sheet corresponds to a 150 cm cut-to-size SH1 track in brushed aluminium. It is not offered in a black finish on this product sheet.
How do you cut the aluminium profile?
A hacksaw is suitable. For a more professional cut, use a circular saw equipped with a blade suitable for aluminium. Hold the profile, follow the tool's safety instructions, and deburr the edges after cutting.
What accessories do you need?
Select the SFC3 segments, SFC2D blanking plates, DS4s for RJ45s, angles, connectors, end caps, separation flange, sockets, and other accessories required for your project. The end caps close the ends of the track. The bare track is not a pre-electrified rail.
How are the RJ45s installed?
The RJ45s are installed via the DS4s, between two SFC3 segments or at the end of the installation, in place of a section of SFC2D. They remain fixed and cannot be moved along the track. Plan their location when designing your installation. The upper compartment allows for low-voltage cabling.
Can you add kitchen accessories?
A lower groove allows you to clip on bars or hooks for kitchen utensils.
Who should perform the electrical connection?
The electrical installation must be carried out by a qualified electrician, following the documentation of the components used.
Additional articles
WHAT OUR CLIENTS SAY ABOUT US
Discover below the reviews left by our hundreds of satisfied customers. These reviews come from verified buyers, and are controlled and verified by Judge.me, acting as a trusted third party between Eubiqeurope and its customers.
Rien à dire
Rapide efficace.
Prise que nous connaissons, pratique et fiable
Matériel très bien emballé, facile de pose. Livraison annoncée sous 8 jours mais livré en 4. Très content de ma commande.
Entièrement satisfait de ces produits, livraison rapide, montage facile.
De mme que pour le rail, jolie prise facile d'utilisation qu'on peut activer ou dsactiver
Excellente qualit du matriel en alu bross, facile monter. j'en suis trs content
10sur10.
Parfait
Parfait
Produit de très bonne qualité. La prise de courant avec led bleu apporte une très belle touche de modernité.
Produit de trs bonne qualit
La prise de courant avec led bleu apporte une trs belle touche de modernit
Ravis que la marque ait reprise la vente des goulottes! Un rsultat quasi parfait! Bricoleur amateur, seul conseil pour un ajustement parfait, un trs lger ponage des bords au papier sec 600 pour liminer l'bavurage
Une notice d'installation claire et simple mettre en oeuvre
Are you a professional ?
Electrician, fitter, furniture maker, kitchen designer...Apply for your professional account now to benefit from your conditions.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.