Best sellers
35 products
Sort by:
35 products
Aluminum ring. Body in Titanium or black finish depending on the variant chosen. Integrated switch and blue LED for your Eubiq track installation.
The benefits of this socket
The integrated switch allows you to control the power supply without unplugging the device.
The blue LED allows you to see if the socket is live.
Position your socket on your Eubiq track where it best suits your needs.
Ring and body finish
Aluminum ring. Body in Titanium or black finish depending on the variant chosen.
Technical specifications
| Socket type | Type F (Schuko) |
| Ring | Aluminum |
| Voltage | 220 – 250 V |
| Dimensions | Diameter 6.7 cm, depth 4.46 cm |
| Protection rating | IP20 |
| Maximum current | 16 A |
| Indicator | Blue power-on LED |
| Switch | Integrated |
| Mounting | Eubiq compatible tracks |
Compatibility and socket type
Choose this socket for devices with a plug compatible with Type F (Schuko).
Installation and use
Place the module on your Eubiq track according to the user guide.
Connect your device to the socket with a compatible plug, respecting the module's electrical specifications.
Then activate the socket by turning it a quarter turn. The blue LED indicates that it is live.
Frequently asked questions
What type of plug should I use?
Choose this socket for devices with a plug compatible with Type F (Schuko).
What material is the ring made of?
Aluminum ring. Body in Titanium or black finish depending on the variant chosen.
Where should I install this socket?
On the compatible tracks in the Eubiq range. The integrated switch allows you to control the power supply and the blue LED indicates that it is live.
Use this module exclusively on Eubiq compatible tracks and follow the product documentation. For any questions regarding electrical installation, consult a qualified electrician.
Electrify only the useful areas of your installation
The SFC3 is the electrical segment that completes an EUBIQ SH1 or RH2 trunking installation. It creates the power supply zones designed to receive your EUBIQ sockets. It cannot be used on its own: it must be integrated into one of these trunking systems, along with the elements required for your configuration.
An electrification component, not a standalone track
The trunking provides the support
Choose the SH1 for surface-mounted installation, or the RH2 for recessing into furniture. The SFC3 is integrated into the selected trunking; it does not replace it.
The SFC3 creates the electrified zones
Place the segments where you need to power your devices. EUBIQ sockets can be positioned and repositioned on the electrified zones according to their mode of use.
The SFC2D completes the other sections
Close the non-electrified zones with cut-to-size SFC2D covers. The combination of SFC3 segments and the SFC2D allows you to achieve the desired final length.
The DS4s allow you to add RJ45s
RJ45s are installed via the DS4s, between two SFC3 segments or at the end of the installation, in place of a section of SFC2D. They remain fixed and cannot be moved along the track.
What role does each element play?
| Element | Function |
|---|---|
| SH1 or RH2 trunking | Forms the support profile for the installation. |
| SFC3 electrical segment | Electrifies the chosen areas to receive the EUBIQ sockets. Not used on its own. |
| SFC2D cover | Closes the non-electrified sections and is cut to size to adjust the final length. |
| DS4 for RJ45 | Allows fixed RJ45 connections between two SFC3 segments or at the end, in place of the SFC2D. |
| End caps | Close the ends of the trunking. |
| EUBIQ sockets | Positioned on the SFC3 electrified zones to plug in your devices. |
To plan for your project: the SH1 or RH2 trunking, the SFC3 segments, the SFC2D covers, the end caps, the EUBIQ sockets, and the appropriate mounting and connection elements. Add the DS4s for the RJ45s and the accessories required for your configuration.
SH1 surface-mounted or RH2 recessed into furniture?
SH1 trunking — surface-mounted
For custom lengths, corner returns, and room perimeter installations. Electrify only the useful areas with the SFC3 segments and complete the other sections with SFC2D. The SH1 features a compartment for low-voltage cables and a lower groove for kitchen accessories.
RH2 trunking — recessed into furniture
For furniture, desks, and large meeting tables. Recessing width: 7 cm; total profile width: 8 cm; protrusion after recessing: 2 mm. The project remains focused on integration into the furniture, without room perimeter installation.
The RH2 was not developed for partitions. Any potential use in a partition requires checking the support material and the method of fixation, without assuming systematic compatibility.
Choose the length and the connection
The lengths offered on this data sheet are: 50, 60, 70, 90, 100, 110, 130, and 150 cm. Choose the segment according to the area to be electrified in your trunking, then adjust the remaining sections with SFC2D.
Connection: select the configuration offered for your length, "Both sides" or "Left", depending on the available variants. Check this choice before ordering and prepare the connection according to the product documentation.
Technical specifications
The maximum segment value must not be confused with that of each socket or the power supply circuit. Have the sizing of the entire system checked by a qualified electrical professional. For use in dry indoor areas.
Prepare your custom-configured installation
Choose your trunking
Choose the SH1 for surface mounting, or the RH2 for recessing into furniture. Define the dimensions and fixings using the technical documentation.
Distribute the SFC3 zones
Choose the segment lengths and connection configurations based on the locations to be powered.
Complete the remaining sections
Plan for cut-to-size SFC2D to adjust the final length, DS4s for fixed RJ45s, and end caps to finish the trunking. The cover adjustment cuts must not be confused with a cut in the SFC3 electrical segment.
Integrate and connect the components
The quick connector facilitates connection, but does not make the SFC3 standalone. The electrical installation must be carried out de-energized by a qualified electrical professional, following the component documentation.
Position your EUBIQ sockets
After installing and checking the entire system, position the EUBIQ socket on an electrified zone, plug in your device, then activate the socket according to its instructions.
Frequently asked questions
Can the SFC3 be used on its own?
No. It must be integrated into an SH1 or RH2 trunking installation, with the appropriate components and connection. It is not a standalone track ready to install.
What is the difference with the SFC2D?
The SFC3 electrifies the areas intended for EUBIQ sockets. The SFC2D is a cover without an electrical function that closes the other sections and is cut to size to achieve the desired length.
Can several electrified zones be planned?
Yes. You can combine several SFC3 zones in an SH1 or RH2 installation and complete the intervals with SFC2D. The connection of the entire system must be prepared according to the selected components.
Which sockets are compatible?
EUBIQ sockets, including models corresponding to the different types of sockets by country. The SFC3 does not directly receive standard wall sockets from other brands.
Do the RJ45s move like the EUBIQ electrical sockets?
No. The RJ45s are installed via the DS4s in fixed locations, between two SFC3 segments or at the end of the installation, in place of the SFC2D.
How to achieve a custom final length?
Choose the SFC3 lengths according to the areas to be electrified and complete with cut-to-size SFC2D in a suitable trunking. The cover adjustment is distinct from a cut in the electrical segment.
SFC3: the electrification of your custom-configured trunking.
SH1 or RH2 for the support, SFC3 for the powered zones, SFC2D for the sections to be covered.
Bring wireless charging to your Android smartphone
Does your Android smartphone not have native wireless charging? It’s not the end of the world. The Qi2001 receiver with micro USB connector is an ultra-flat adapter that plugs discreetly into your phone's port and instantly adds compatibility with standard Qi wireless chargers. No need to change phones: just place it down, and you're good to go.
Why choose an induction adapter instead of changing your phone?
A fraction of the price of a new smartphone, for identical functionality.
Works with all Qi-certified wireless charging stations available on the market.
Fits naturally under your phone case without making it bulky.
No setup, no pairing: plug it in and set it on the pad—that's it.
How to use the Qi2001 receiver?
Insert the micro USB connector of the Qi2001 receiver into the charging port of your Android smartphone.
Slide the flat module between your phone and its protective case for a clean, discreet finish.
Simply place your smartphone on any Qi-compatible wireless charging pad or station. Charging starts automatically.
Compatible Android smartphones
This micro USB induction charging adapter is designed for all Android devices with a micro USB port—the vast majority of smartphones released before 2018. Here are some examples of compatible models:
⚠️ This receiver is exclusively compatible with devices equipped with a micro USB port. For recent smartphones equipped with a USB-C port, a dedicated version is available.
Technical specifications
| Specification | Detail |
|---|---|
| Connector type | Micro USB (Android) |
| Charging standard | Qi (compatible with all Qi stations) |
| Length | 55.6 mm |
| Width | 54.4 mm |
| Height (thickness) | 5.5 mm |
| Weight | 20 g |
| Brand | Qinside |
| Charging mode | Wireless induction |
Ultra-compact format
What you really gain every day
Imagine: you get home, place your phone on the pad on your nightstand or desk, and that's it. No cable to look for in the dark, no fumbling for a connector, no port damaged from daily plugging in.
The Qi2001 receiver turns a daily chore into a natural, fluid motion—without touching your current phone and without unnecessary expense.
It is also an excellent way to extend the life of your device's micro USB port, which is often weakened by years of repeated connections.
Frequently Asked Questions
Slight heating is perfectly normal and expected during induction charging—it's the very principle of the technology. It poses no danger to your device under normal conditions of use.
Yes. The Qi2001 receiver is designed to work under a thin case (up to about 3mm thick). Plastic, TPU, or silicone cases are generally compatible. Cases with integrated wallets or metal plates, however, may interfere with charging.
Yes, as long as your induction charger is Qi standard certified. It is therefore compatible with the vast majority of wireless charging pads and stations available on the market, regardless of the brand.
No. Once the receiver is plugged into the micro USB port, it is occupied. To charge by cable, you will need to remove the receiver. This is why it is recommended to use it permanently in combination with a Qi station at home or at the office.
The Qi2001 micro USB receiver is wireless freedom at your fingertips—without changing phones, without compromise.
Place it, charge it, live it. It's that simple.
Discover the Eubiq range
Aluminum finish — a clean, professional transition at every outside corner
Designed exclusively for EUBIQ's SH1 ducting, this fixed 90° outside corner is made of plastic with an aluminum finish. It provides a neat junction at an outside corner while maintaining visual consistency with your ducting.
Why choose a dedicated corner?
Designed for SH1 ducting
A dedicated piece for the SH1 profile to create the transition between two sections at an outside corner.
Cable routing
Follows the cable path around a change in direction. Check their positioning and ensure there are no deburred cut edges during installation.
Snap-fit installation
Snaps onto SH1 ducting sections. No special tools are required for installation in most configurations.
Aluminum finish
An aluminum appearance that matches the installation. The piece is made of plastic, not aluminum.
DIY cut vs. original corner
- Requires preparing and trimming the cuts
- Edges must be carefully deburred
- Joint precision depends on the quality of the cut
- Requires finishing work at the change in direction
- Dedicated piece for the SH1 profile
- Fixed 90° outside corner
- Snap-fit installation
- Plastic with aluminum finish
Technical specifications
This corner is intended exclusively for SH1 ducting. Check your ducting reference carefully before purchasing.
In what contexts should it be used?
Workstations and offices
Manage the routing of IT and electrical cables around a partition or furniture corner.
Workshops and technical spaces
Route around the protruding corners of a room with a dedicated junction for your SH1 ducting.
Residential installations
Create an outside corner in a living room, bedroom, or hallway with a discreet finish that matches the ducting.
Commercial premises
Maintain a neat appearance in spaces visible to customers or the public.
4-step installation guide
Cut your ducting sections
Ensure that your two SH1 ducting sections are cut correctly at 90° (straight cut, not mitered).
Position the corner
Snap the SH1 outside corner onto the end of each section. The piece is designed to fit without force.
Check the alignment
Visually check that the two ducting sections are properly aligned and that the corner is correctly applied against the wall surface.
Secure if necessary
Depending on your configuration, secure the ducting to the wall according to the SH1 range recommendations and the characteristics of the support surface.
Plastic and aluminum finish: two distinct pieces of information
The piece is made of plastic. Its aluminum finish does not mean it is made of metal.
The aluminum finish complements the appearance of your SH1 installation.
A discreet transition at the outside corners of your ducting run.
Frequently asked questions
Is this corner compatible with other EUBIQ ducting?
No. It is designed specifically for SH1 ducting. For other references in the range, check the compatible accessories listed on each product sheet.
Is it made of aluminum?
No. It is made of plastic and has an aluminum finish. It is not a solid aluminum piece.
Can the angle be set to anything other than 90°?
No, this corner is fixed at 90°. Check that this geometry matches your installation.
Do I need to buy an inside corner as well?
This depends on your ducting run. The outside corner is for a protruding corner. For an inset corner, you need a suitable inside corner.
Is this accessory sold individually?
Yes, it is sold individually. Allow one corner per outside corner of your installation.
Additional information
A neat transition for your SH1 installation.
Plastic, aluminum finish · Fixed 90° outside cornerAdd to cart
150 cm — Exclusively compatible with SH1 profile
Organize the routing of your cables in the EUBIQ SH1 cable duct with this 150 cm separation barrier. It creates a physical separation between the cable routing areas for power cables and data cables.
Two wiring areas in the SH1 profile
Physical separation
The barrier helps define the cable routing areas inside the SH1 duct.
Organized routing
Power cables and signal cables have separate routes, for a clearer installation.
Accessory designed for the SH1
Its shape is adapted to this EUBIQ profile. Check the reference of your duct before ordering.
EUBIQ barrier specifications
Adjust to the useful length of the route if necessary.
Designed specifically for the EUBIQ SH1 duct.
Installation in 5 steps
Prepare your duct
Check the mounting of the SH1 profile and prepare the installation area according to the system documentation. Any work on the electrical installation must be carried out when de-energized by a person qualified in electricity.
Adjust the length if necessary
For a section shorter than 150 cm, measure the useful length then adjust the barrier with a suitable tool. Hold the piece, follow the tool's safety instructions and deburr the cut.
Insert the barrier
Position it in the designated location of the SH1 profile, in accordance with the system documentation, to define two routing areas.
Distribute the cables
Organize the power cables and signal cables on either side of the separation, according to the requirements applicable to the installation.
Check then close
Check the positioning of the barrier and the cables before closing the profile with the appropriate elements.
For which projects?
Professional premises
Organization of cabling in the SH1 routes of offices, workstations and professional premises.
Residential developments
Organized routing of power and data cables in home SH1 installations.
Technical specifications
| Characteristic | Value |
|---|---|
| Brand | EUBIQ |
| Length | 150 cm |
| Dimensions (L × W × H) | 150 × 2 × 1 cm |
| Indicated weight | 150 g |
| Compatibility | Exclusively SH1 profile |
| Use | Power / low-voltage separation |
| Installation | Snap-in into the profile |
Frequently asked questions
What length is supplied?
The barrier measures 150 cm. Its dimensions are 150 × 2 × 1 cm.
Can the length be adjusted?
Yes. For a section shorter than 150 cm, measure the required length then make a clean cut with a suitable tool, following its safety instructions. Deburr before installation.
Is it compatible with other profiles?
This barrier is designed exclusively for the EUBIQ SH1 profile. For another model, check the reference of the corresponding separator.
How is the barrier installed?
By snapping it into the designated location of the SH1 profile, without screws or glue for the barrier itself. An eventual cut requires a suitable tool.
Is the barrier sufficient to validate the installation?
No. This accessory defines the routing areas in the duct. The entire cabling and its implementation must still be checked by a person qualified in electricity.
Important note: the barrier is a physical separation accessory. It does not constitute a certification of conformity of the installation, nor a guarantee of absence of interference or compartment sealing.
An organized SH1 route, with distinct wiring areas.
EUBIQ separation barrier · Length 150 cm · SH1 profile
Built-in induction charger for smartphones, Qi technology.
Specifications
Installation: built-in
Charging: Induction
Standard: Qi
Certifications: EN55022:2010+AC:2011, EN61000-3-2, EN61000-3-3, EN55024, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6,EN61000-4-8, EN61000-4-11, EMC 2014/30/EU
Supply voltage: 5 V, 9 V (Transformer provided)
Power: 15 W
Dimensions: Diameter: 8 cm x Height: 1.55 cm
Power cable length: 100 cm
The Qi1001 wireless charging station is the most versatile in the world of induction charging. It integrates into all materials except for metallic or electro-conductive surfaces.
The station can be integrated into new furniture by the manufacturer and will be delivered ready to use to charge your devices. However, it can also be installed in existing furniture (bar, table, desk, bedside table, ...).
The Qi1001 induction charger comes with a 5V - 9V power transformer, a 1.00 meter cable, and a cover. It can be installed invisibly by routing out the material, leaving 3 mm of material between the charger and the surface of the furniture, but you can also drill into the furniture with an 8 cm diameter hole saw to integrate the charger and cover it with the provided lid.
Once the induction charger is installed, simply place a Qi-compatible device on top of the source to charge it.
If your device is not equipped with induction charging technology, you can still charge it using one of the Qi2001 receivers with a micro-usb connector or an Iphone connector.
-
Assembly video
-
Frequently asked questions
What is Qi wireless charging?
Qi is the new universal standard for the wireless charging of battery-powered devices such as mobile phones, iPods, MP3 players, cameras...
Wireless energy transmission occurs via electromagnetic induction. With induction energy transmission, the energy required for electronic devices is not transmitted via a cable but wirelessly via electromagnetic fields. The principle is very simple: the Qi transmitter (charging station) transfers the required energy to the Qi receiver (the mobile phone).
Why wireless charging?
The biggest advantage of Qi wireless charging technology is that mobile phones and chargers from different manufacturers are compatible. The only requirement is that both devices, the transmitter and the receiver, comply with Qi specifications.
In this way, any Qi-compatible device can be charged on a Qi-compatible charging station, regardless of the manufacturer or brand of the devices.
Many mobile phones, including those from leading market brands such as the iPhone 8, iPhone X, Nokia, Samsung, Sony, LG, Motorola, and HTC, are already compatible with the Qi standard and can therefore be charged on all Qi charging stations. More and more manufacturers are integrating Qi into their electronic devices, which allows them to charge different electronic devices with a single charging station without needing various charging stations.
How does Qi wireless charging work?
Induction charging, "wireless" charging in the literal sense, is not a completely new product. Electric toothbrushes have operated on the principle of induction charging for years.
Qi wireless charging uses inductive resonant coupling between the transmitter (charging station) and the receiver (mobile phone).
The transmitter produces a regular verification signal, which recognizes, thanks to the electromagnetic frequency, if a device to be charged is on the Qi wireless charging station. The transmitter modulates the charging and verifies compatibility with the Qi standard.
Once the Qi compatibility and required energy are calculated, induction charging begins. During charging, the transmitter and receiver remain in contact and switch to standby mode once the battery is fully charged.
Another advantage of the Qi charger is that it switches on and transfers energy only if a compatible device needing to be charged is placed on it.
Thanks to this technology and very good insulation of the transmitting and receiving coil, electromagnetic radiation is fundamentally reduced.
Is wireless charging useful?
An infinite number of smartphones are available worldwide and battery life has become shorter. Every brand, and even every device, has its own charger. Every time you buy a new device, you need a new compatible charger. You quickly end up with an unimaginable number of different chargers.
Wouldn't it be easier to have a single charger for all your phones, iPods, MP3 players, cameras, and no longer need those annoying cables?
Too good to be true?
Not with Qinside wireless induction charging stations!
Imagine a Qi wireless charging station for all your Qi-compatible phones. Forget all the different chargers and the tangle of cables and share a single charger at home, at the office, or on the go.
Imagine lounges, waiting rooms, airports, train stations, bars, and restaurants with Qi charging stations integrated into the furniture.
You can charge your devices whenever you want, regardless of the model, brand, or manufacturer of your device.
The only requirement is to have a Qi-compatible device or to use the Qi2001 receiver for iPhone 4, iPhone 4s, and all phones with a micro-USB connection, or to use our Qi charging case for iPhone 5, iPhone 6, and iPhone 6+.
Fast and simple: charge your devices with wireless energy transfer of up to 10 watts.
Dead batteries in mobile phones, iPods, MP3 players, and cameras will be a thing of the past!
Qi, the international standard for induction charging?
Do you remember the first time you heard about Wi-FiTM or Bluetooth®?
Just as Wi-FiTM has become the international standard for wireless internet connections and Bluetooth® for hands-free devices, Qi will become the international standard for induction charging. The Qi standard is the future of wireless charging for battery-powered devices for everyone.
How much electromagnetic radiation do Qi wireless charging systems emit?
Minimal. The Qi principle has been used for years, with no known physical effect on human health, in electronic toothbrushes. Given the short range of Qi wireless charging technology, electromagnetic radiation is very limited. Electromagnetic radiation has low emission around the Qi charging station and only when a device is placed on the charging station.
Thanks to the additional insulation of the transmitting and receiving coil of the Qi standard, the emitted electromagnetic radiation is reduced.
Why is there an international standard for wireless charging?
Founded on December 17, 2008, the Wireless Power Consortium (WPC) adopted the Qi standard for induction charging that same year. The introduction of the global Qi standard allows universal induction charging for all Qi-compatible electronic devices.
This means that any Qi-compatible device can be charged on any Qi-compatible charging station. The Wireless Power Consortium currently has 250 members, including market leaders such as Samsung, Nokia, LG, Panasonic, HTC, Sony, and Motorola, making it the largest association for wireless induction charging.
According to WPC chairman Menno Treffers, because of the increase in Qi products, it is essential to ensure that all wireless chargers work correctly with all mobile devices. The database created and regularly updated by Testronic for products compliant with the Qi standard makes it easy to verify if a new product works with all previously certified products.
According to Johan Craeybecks, Chief Technology Officer at Testronic Labs: "We believe the introduction of the Qi standard is one of the most important technical developments for users of mobile devices such as phones, tablets, or other devices, which these days are part of everyday business or private life."
Can you charge several phones on a Qi1001 charger?
No, the charging capacity of a Qi charger is adapted to a single device.
Additional information
- Brand: Qinside
- Weight: 223 g
- Dimensions (L × W × H): 16 × 11 × 5 cm
The operation of the CCS5 cord, featuring Eubiq's premium sockets: aluminum ring, matte black finish, and blue power-on LED. This model is equipped with a 1.5 m non-coiled black cable, with an IEC C5 "Mickey" termination.
A cord for your connection
The CSP5-15 connects directly to all Eubiq power tracks. It performs the same function as the CCS5, but replaces the coiled cord with a 1.5 m non-coiled cable and features the premium socket design. The number 5 in the CSP5-15 and CCS5 references corresponds to the IEC C5 cable termination, known as "Mickey".
Aluminum ring and black finish
The ring is made of aluminum and the body features a matte black finish. The blue LED indicates that the power is on, unlike the red indicator on the CCS5 and CCS7 cords.
Technical specifications
| Model | CSP5-15 |
| Type | Cord with non-coiled cable |
| Brand | EUBIQ |
| Reference | 2056-0002-0415 |
| Voltage | 220 V |
| Current | 16 A |
| Ring | Aluminum |
| Finish | Matte black |
| Indicator | Blue power-on LED |
| Cable | Black, non-coiled |
| Cable termination | IEC C5 "Mickey" |
| Cable length | 1.5 m |
| Indicated dimensions (L × W × H) | 32 × 14 × 1 cm |
| Connection | All Eubiq power tracks |
Compatibility and connection
The CSP5-15 is compatible with all Eubiq power tracks. The IEC C5 "Mickey" termination must match the connector of the equipment to be connected. Observe the electrical characteristics of the cord and the manufacturer's instructions for the equipment.
Frequently asked questions
What does the number 5 mean?
As with the CCS5, the number 5 corresponds to the IEC C5 cable termination, known as "Mickey".
How does it differ from the CCS5?
The operation and IEC C5 "Mickey" termination are identical. The CSP5-15 features an aluminum ring, a matte black finish, a blue LED, and a 1.5 m non-coiled cable. The CCS5 has a 1.2 m coiled cable and a red indicator.
What is the blue LED for?
It indicates that the cord is powered.
Is the cable coiled?
No. The CSP5-15 has a 1.5 m non-coiled black cable.
Which tracks does it connect to?
It connects directly to all Eubiq power tracks.
What are its electrical characteristics?
Voltage: 220 V. Current: 16 A.
Follow the documentation for the cord and the track. For any work on the installation wiring, consult a qualified electrician and work with the power off. The LED does not replace a verification of the absence of voltage.
The design of Eubiq premium sockets: aluminum ring, matte black finish, and blue power-on LED. This model is equipped with a 1.5 m non-twisted black cable, with an IEC C7 termination.
A cord for your connection
The CSP7-15 connects directly to all Eubiq power tracks. It features the same design as the CSP5-15, with a 1.5 m non-twisted black cable. The difference lies in the cable termination: IEC C7 for the CSP7-15, IEC C5 "Mickey" for the CSP5-15. The number 7 corresponds to this IEC C7 termination.
Aluminum ring and black finish
The ring is made of aluminum, and the body features a matte black finish. The blue LED indicates that the power is on, unlike the red indicator on the CCS5 and CCS7 cords.
Technical specifications
| Model | CSP7-15 |
| Type | Cord with non-twisted cable |
| Brand | EUBIQ |
| Reference | 2055-0002-0415 |
| Voltage | 220 V |
| Current | 16 A |
| Ring | Aluminum |
| Finish | Matte black |
| Indicator | Blue power-on LED |
| Cable | Black, non-twisted |
| Cable termination | IEC C7 |
| Cable length | 1.5 m |
| Indicated dimensions (L × W × H) | 32 × 14 × 1 cm |
| Connection | All Eubiq power tracks |
Compatibility and connection
The CSP7-15 is compatible with all Eubiq power tracks. The IEC C7 termination must match the connector of the equipment to be connected. Observe the electrical characteristics of the cord and the manufacturer's instructions for the equipment.
Frequently asked questions
What does the number 7 mean?
The number 7 corresponds to the IEC C7 cable termination, as with the CCS7.
How does it differ from the CSP5-15?
Both models feature an aluminum ring, a matte black finish, a blue LED, and a 1.5 m non-twisted cable. The CSP7-15 has an IEC C7 termination, while the CSP5-15 has an IEC C5 "Mickey" termination.
What is the blue LED for?
It indicates that the cord is powered.
Is the cable coiled?
No. The CSP7-15 has a 1.5 m non-twisted black cable.
Which tracks does it connect to?
It connects directly to all Eubiq power tracks.
What are its electrical characteristics?
Voltage: 220 V. Current: 16 A.
Follow the documentation for the cord and the track. For any work on the installation wiring, consult a qualified electrician and work with the power off. The LED does not replace a verification of the absence of voltage.
Showing 16/35
NextCollections featured
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
- Choosing a selection results in a full page refresh.
- Opens in a new window.