Recessed electric rail

The RH2 EUBIQ track is based on a fully modular system: you can freely choose the accessories to install according to your needs. You can clip on 2P+T sockets (French standard), universal sockets for international use, USB-A and USB-C chargers, as well as DS3 or DS4 RJ45 boxes for network connectivity. These modules can be positioned anywhere on the track without tools and can be moved or replaced at any time. Unused slots are covered by included neutral covers. Please note that the sockets and accessories are not supplied with the track: they must be selected separately from the EUBIQ compatible module catalog.

The RH2 track presented here is available in four standard lengths. The 60 cm version offers 5 socket slots, the 80 cm version offers 8, the 100 cm version has 10, and the 120 cm version has a total of 13. Regardless of the length chosen, you can incorporate up to 3 RJ45 slots at the end of the track. The standard track can be shortened by a maximum of 9 cm. To create an installation of the desired length, choose the RH2 track in the "Customizable Track" collection. This customizable solution is distinct from the standard-length tracks presented on this sheet.

The RH2 is designed to be recessed into furniture. Start by choosing the appropriate length, then check the material of the cabinet and the suitability of the mounting method. Prepare the cutout according to the installation guide: 7 cm of recess width and 3.4 cm of depth. The total width of the track is 8 cm. Then insert and fix the track in the cabinet according to the instructions in the guide: its front face protrudes by 2 mm from the support after recessing. The connection to the electrical network must be carried out by a qualified electrician. Consult the installation guide provided with the product before starting.

The RH2 was developed for recessing into furniture, not for installation in partitions. Integration into a partition may eventually be considered, but it requires checking the material of the partition and the suitability of the mounting method. Do not assume that the fixings intended for furniture are suitable for all partitions.

The RH2 track is designed to be recessed into furniture, particularly kitchen furniture. Its IP40 protection rating protects it against the penetration of solid bodies, but it is not designed to be directly exposed to water splashes. It is therefore recommended to install it away from any direct contact with moisture. For contemporary kitchens, the brushed aluminum finish blends perfectly into light and minimalist interiors, while the brushed black finish will be more suitable for black kitchens or more industrial settings.

Yes. Each RH2 track is equipped with an electrical connector at each of its two ends, allowing several tracks to be connected together. If you wish to create an installation of a precise length, choose the RH2 track in the "Customizable Track" collection, rather than limiting yourself to standard lengths.

The RH2 track benefits from several certifications that attest to its compliance and reliability. It is certified according to the international IEC/EN 61534 standard, which governs electrical power supply track and duct systems. It also bears the CE marking, guaranteeing its compliance with European electrical safety directives. Finally, its IP40 protection rating ensures protection against the intrusion of solid bodies. These guarantees make the RH2 a product suitable for both residential installations and demanding professional environments, where electrical safety is an absolute priority.

The difference is fundamental, both aesthetically and functionally. A standard power strip sits on the surface, clutters your space, and offers a fixed number of sockets in fixed locations. The RH2 EUBIQ track, on the other hand, is designed to be recessed into your furniture. Its 8 cm wide front face remains visible and protrudes by 2 mm from the support after recessing. The recessing depth is 3.4 cm. The modules clip freely along the entire length of the track, allowing you to choose their type and position according to your actual needs. You can move them or add more without tools. The final result is clean, discreet, and professional, far from the cluttered appearance of a power strip placed directly on the worktop.