SH1 exterior corner for trunking
- Fixed 90° outside corner – A dedicated piece for the outside corners of your SH1 trunking.
- Snap-fit installation – For a neat joint between the trunking sections.
- Plastic, aluminum finish – A look that matches your installation, without confusion between the material and the finish.
14,16 €
- Free of Charge
- Immediate response
- 100% secure
In stock - Ready to be shipped
Aluminum finish — a clean, professional transition at every outside corner
Designed exclusively for EUBIQ's SH1 ducting, this fixed 90° outside corner is made of plastic with an aluminum finish. It provides a neat junction at an outside corner while maintaining visual consistency with your ducting.
Why choose a dedicated corner?
Designed for SH1 ducting
A dedicated piece for the SH1 profile to create the transition between two sections at an outside corner.
Cable routing
Follows the cable path around a change in direction. Check their positioning and ensure there are no deburred cut edges during installation.
Snap-fit installation
Snaps onto SH1 ducting sections. No special tools are required for installation in most configurations.
Aluminum finish
An aluminum appearance that matches the installation. The piece is made of plastic, not aluminum.
DIY cut vs. original corner
- Requires preparing and trimming the cuts
- Edges must be carefully deburred
- Joint precision depends on the quality of the cut
- Requires finishing work at the change in direction
- Dedicated piece for the SH1 profile
- Fixed 90° outside corner
- Snap-fit installation
- Plastic with aluminum finish
Technical specifications
This corner is intended exclusively for SH1 ducting. Check your ducting reference carefully before purchasing.
In what contexts should it be used?
Workstations and offices
Manage the routing of IT and electrical cables around a partition or furniture corner.
Workshops and technical spaces
Route around the protruding corners of a room with a dedicated junction for your SH1 ducting.
Residential installations
Create an outside corner in a living room, bedroom, or hallway with a discreet finish that matches the ducting.
Commercial premises
Maintain a neat appearance in spaces visible to customers or the public.
4-step installation guide
Cut your ducting sections
Ensure that your two SH1 ducting sections are cut correctly at 90° (straight cut, not mitered).
Position the corner
Snap the SH1 outside corner onto the end of each section. The piece is designed to fit without force.
Check the alignment
Visually check that the two ducting sections are properly aligned and that the corner is correctly applied against the wall surface.
Secure if necessary
Depending on your configuration, secure the ducting to the wall according to the SH1 range recommendations and the characteristics of the support surface.
Plastic and aluminum finish: two distinct pieces of information
The piece is made of plastic. Its aluminum finish does not mean it is made of metal.
The aluminum finish complements the appearance of your SH1 installation.
A discreet transition at the outside corners of your ducting run.
Frequently asked questions
Is this corner compatible with other EUBIQ ducting?
No. It is designed specifically for SH1 ducting. For other references in the range, check the compatible accessories listed on each product sheet.
Is it made of aluminum?
No. It is made of plastic and has an aluminum finish. It is not a solid aluminum piece.
Can the angle be set to anything other than 90°?
No, this corner is fixed at 90°. Check that this geometry matches your installation.
Do I need to buy an inside corner as well?
This depends on your ducting run. The outside corner is for a protruding corner. For an inset corner, you need a suitable inside corner.
Is this accessory sold individually?
Yes, it is sold individually. Allow one corner per outside corner of your installation.
Additional information
A neat transition for your SH1 installation.
Plastic, aluminum finish · Fixed 90° outside cornerAdd to cart| Characteristic | Value |
|---|---|
| Subject | Plastic |
| Finishing | Aluminum |
| Attachment type | Surface mounted |
| Brand | EUBIQ |
| Reference | 5011-0504-0500 |
FAQ7 Questions
FAQ – SH1 trunking outside corner with aluminum finish EUBIQ
Is this outside corner compatible with all EUBIQ trunking?
No, it is designed exclusively for SH1 trunking. Check your trunking model before ordering. For another model, consult the accessories suitable for it.
What is it made of?
The part is made of plastic with an aluminum finish. The finish describes its appearance, not its material: it is not a solid aluminum corner.
What is the difference between an outside corner and an inside corner?
An outside corner corresponds to a protruding corner that the trunking path goes around. An inside corner corresponds to a recessed corner. These two accessories are not interchangeable.
Is the corner adjustable?
No. It is fixed at 90°. Check that this geometry matches your installation.
Why choose a dedicated part?
It is adapted to the SH1 profile and allows for a neat junction at the change of direction, without having to make a miter joint. The cuts of the sections must remain properly prepared and deburred.
How to install it?
Prepare the two sections of SH1 trunking with straight cuts at 90°. Fit the corner without forcing, check the alignment then fix the trunking according to the recommendations of the SH1 range and the characteristics of the support.
Is it sold individually?
Yes. Allow one outside corner per 90° protruding corner of your path. Recessed corners require suitable inside corners.
Additional articles
WHAT OUR CLIENTS SAY ABOUT US
Discover below the reviews left by our hundreds of satisfied customers. These reviews come from verified buyers, and are controlled and verified by Judge.me, acting as a trusted third party between Eubiqeurope and its customers.
Rien à dire
Rapide efficace.
Prise que nous connaissons, pratique et fiable
Matériel très bien emballé, facile de pose. Livraison annoncée sous 8 jours mais livré en 4. Très content de ma commande.
Entièrement satisfait de ces produits, livraison rapide, montage facile.
De mme que pour le rail, jolie prise facile d'utilisation qu'on peut activer ou dsactiver
Excellente qualit du matriel en alu bross, facile monter. j'en suis trs content
10sur10.
Parfait
Parfait
Produit de très bonne qualité. La prise de courant avec led bleu apporte une très belle touche de modernité.
Produit de trs bonne qualit
La prise de courant avec led bleu apporte une trs belle touche de modernit
Ravis que la marque ait reprise la vente des goulottes! Un rsultat quasi parfait! Bricoleur amateur, seul conseil pour un ajustement parfait, un trs lger ponage des bords au papier sec 600 pour liminer l'bavurage
Une notice d'installation claire et simple mettre en oeuvre
Are you a professional ?
Electrician, fitter, furniture maker, kitchen designer...Apply for your professional account now to benefit from your conditions.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.