SFC2D, Shutter 100 cm - Brushed aluminium finish
- Custom length – 100 cm cut-to-size blanking plate to complete SFC3 electrical segments.
- Electrify only the useful areas – Covers the non-electrified sections of your RH2 or SH1 configuration.
- Brushed aluminum finish – A neat appearance on the blanked sections of your trunking.
12,84 €
- Free of Charge
- Immediate response
- 100% secure
In stock - Ready to be shipped
Complete the non-electrified areas of your EUBIQ installation
The SFC2D is a blind panel with no electrical function, designed for RH2 and SH1 modular trunking. Pair it with SFC3 electrical segments and cut it to close off non-electrified sections and achieve the desired length, with a uniform brushed aluminum finish.
Why choose this blind panel?
Closes off empty spaces
Closes off sections of trunking that are not equipped with SFC3 electrical segments.
Brushed aluminum finish
Visually extends your installation with a neat and discreet finish.
Cut to the desired length
Supplied in 100 cm lengths, the SFC2D can be cut to complete SFC3 segments and adjust the final length of your installation.
Electrify only the useful areas
Reserve SFC3 segments for locations where you want to use your EUBIQ outlets and complete the other sections with SFC2D.
What is a trunking blind panel used for?
A modular installation combines electrified areas created by SFC3 segments and non-electrified sections closed off by the SFC2D. The blind panel makes it possible to adapt the final length to the project without electrifying the entire trunking.
- Closes off empty spaces between SFC3 segments
- Adjusts lengths by cutting the blind panel
- Provides a continuous finish on non-electrified sections
- Compatible with RH2 and SH1 modular trunking
On an SH1 installation, for example, you can create a route with corners or wrap around a room, electrifying only certain areas. SH1 trunking uses the same profile as the SH1 rails sold in 60, 80, 100, and 120 cm lengths; the modular solution allows you to customize the layout.
Technical specifications
Compatibility: modular trunking
Choose the profile suitable for your layout, then complete its non-electrified areas with the SFC2D.
Recessed into furniture
The RH2 is designed to be recessed into furniture. Its total width is 8 cm, with a 2 mm protrusion after recessing. It was not developed for partitions: this use requires checking the material and method of attachment.
Surface-mounted installation
For a custom wall route, a custom length, or wrapping around a room. Pair the SFC3 segments and SFC2D blind panels to choose the areas to electrify.
To complete the assembly, plan for the trunking, SFC3 segments, SFC2D blind panels, end caps, corners, connectors, and other accessories suitable for the project. The SFC2D closes off non-electrified longitudinal sections; it does not replace end caps.
Brushed aluminum finish
The blind panel completes non-electrified sections without interrupting the appearance of your installation.
Brushed aluminum finish for the closed-off sections.
A 100 cm length to be cut down according to the spaces to be closed.
How to prepare and install the SFC2D?
Measure the lengths to be closed in your RH2 or SH1 trunking, taking into account the planned SFC3 segments.
A hacksaw is suitable. For a more professional cut, use a circular saw equipped with a blade suitable for aluminum. Hold the piece securely, follow the tool's safety instructions, and deburr the edges after cutting. The adjustment described applies to the SFC2D, not the SFC3 electrical segment.
Place the SFC2D in the locations provided by the profile, following the component documentation.
Check the fit with the adjacent segments and plan for the trunking end caps. Any work on the electrical installation must be carried out by a qualified electrician, with the power turned off.
Frequently asked questions
What is the difference between SFC2D and SFC3?
The SFC3 creates an electrified area designed to receive EUBIQ outlets. The SFC2D is a blind panel with no electrical function that closes off the other sections and makes it possible to adjust the final length.
How do I calculate the quantity to order?
Add up the lengths to be closed off, then plan for the cuts in the 100 cm elements. Take into account the distribution of the different sections and the cutting losses, not just the total length.
Can the electrified areas be changed later?
The configuration can be revised by combining the appropriate SFC3 and SFC2D elements. Any electrical modification must be prepared and carried out by a qualified electrician.
Does the SFC2D replace an end cap?
No. It closes off a section of the trunking along its length. End caps are separate elements to be planned for closing off the ends of the profile.
SFC2D: the right length, in the useful places.
Complete your SFC3 segments and ensure a neat finish for your modular installation.
FAQ8 Questions
FAQ – SFC2D EUBIQ Blind
What is the SFC2D used for?
It is a blind without electrical function. It closes the non-electrified sections of an RH2 or SH1 composition track, complementing the SFC3 electrical segments.
How to obtain a custom length?
The SFC2D is supplied in 100 cm lengths. Cut it to complete the SFC3 segments and achieve the desired final length. The adjustment described concerns the blind, not the cutting of an electrical segment.
How to cut it?
A hacksaw is suitable. For a more professional cut, use a circular saw equipped with a blade suitable for aluminum. Hold the piece securely, follow the tool's safety instructions, and deburr the edges after cutting.
Which profiles are compatible?
The SFC2D is designed for RH2 and SH1 composition tracks. The RH2 is designed for furniture recessing, with a total width of 8 cm and a 2 mm overhang. It was not developed for partitions; this use requires checking the material and method of installation. The SH1 is surface-mounted, not installed in the floor.
Can only certain areas of an SH1 track be electrified?
Yes. Use the SFC3 segments in the required locations and complete the other sections with cut SFC2D. You can thus create a custom length or a room perimeter with the necessary corners and connectors.
How many blinds should be ordered?
Measure each section to be closed and create a cutting plan using 100 cm elements. Take into account cutting losses and the distribution of the sections, not just their total length.
Does the SFC2D replace the end caps?
No. It closes the non-electrified longitudinal sections. The end caps are separate elements, to be provided to close the ends of the profile.
Can the installation be upgraded?
The configuration can be revised by combining the appropriate SFC3 and SFC2D elements. Any electrical modification must be carried out while the power is off by a person qualified in electricity, following the component documentation.
Additional articles
WHAT OUR CLIENTS SAY ABOUT US
Discover below the reviews left by our hundreds of satisfied customers. These reviews come from verified buyers, and are controlled and verified by Judge.me, acting as a trusted third party between Eubiqeurope and its customers.
Rien à dire
Rapide efficace.
Prise que nous connaissons, pratique et fiable
Matériel très bien emballé, facile de pose. Livraison annoncée sous 8 jours mais livré en 4. Très content de ma commande.
Entièrement satisfait de ces produits, livraison rapide, montage facile.
De mme que pour le rail, jolie prise facile d'utilisation qu'on peut activer ou dsactiver
Excellente qualit du matriel en alu bross, facile monter. j'en suis trs content
10sur10.
Parfait
Parfait
Produit de très bonne qualité. La prise de courant avec led bleu apporte une très belle touche de modernité.
Produit de trs bonne qualit
La prise de courant avec led bleu apporte une trs belle touche de modernit
Ravis que la marque ait reprise la vente des goulottes! Un rsultat quasi parfait! Bricoleur amateur, seul conseil pour un ajustement parfait, un trs lger ponage des bords au papier sec 600 pour liminer l'bavurage
Une notice d'installation claire et simple mettre en oeuvre
Are you a professional ?
Electrician, fitter, furniture maker, kitchen designer...Apply for your professional account now to benefit from your conditions.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.