Internal angle for trunking SH1
- Fixed 90° inside corner – A dedicated piece for the inside corners of your SH1 track.
- Snap-fit installation – For a neat junction between two trunking sections.
- Aluminum or matte black finishes – Choose the variant that matches your installation.
10,30 €
- Free of Charge
- Immediate response
- 100% secure
In stock - Ready to be shipped
A neat transition at every inside corner
Designed for EUBIQ's SH1 trunking, this fixed 90° inside corner angle allows you to create a junction in an inside corner. Made of plastic, it is available in an aluminum or matte black finish to match your installation.
Why choose a dedicated angle?
Designed for SH1 Trunking
A dedicated piece for the SH1 profile to create the transition between two trunking sections in an inside corner.
Cable Routing
Follows the cable routing around the change of direction. Check their positioning and the absence of unburred cut edges during installation.
Snap-Fit Installation
Snaps onto SH1 trunking sections to create a 90° junction in an inside corner.
Two Finishes
Choose the aluminum or matte black finish depending on the desired variant. The finish describes the appearance of the part, not its plastic material.
DIY Cut vs. Dedicated Angle
- Requires preparing and adjusting the cuts
- Edges must be carefully deburred
- Joint precision depends on the quality of the cut
- Requires finishing work at the change of direction
- Dedicated piece for the SH1 profile
- Fixed 90° inside corner angle
- Snap-fit installation
- Aluminum or matte black finishes
Technical Specifications
This angle is designed exclusively for SH1 trunking. Check your trunking reference, the finish, and the corner geometry before ordering.
In what contexts should it be used?
Workstations and Desks
Extend your SH1 route in an inside corner to follow the cable routing of the installation.
Workshops and Technical Areas
Create a dedicated junction at the inside corners of your trunking route.
Residential Fit-outs
Create a neat transition in the inside corners of a room by choosing a finish that matches your trunking.
Commercial Premises
Maintain a consistent appearance in offices, reception areas, or commercial premises.
5-Step Installation Guide
Position the first SH1 section
Prepare the length of trunking and position it along the wall up to the inside corner, according to the mounting instructions.
Snap in the inside corner angle
Present the angle at the end of the first section and snap it in without forcing it.
Connect the second section
Insert the second section into the other opening, perpendicular to the first, to follow the inside corner.
Check alignment and fastening
Check the fit of the elements and secure the trunking according to the SH1 range recommendations and the characteristics of the support.
Check cable routing and closure
Check the cable routing before completing the assembly according to the system documentation. Any work on the electrical installation must be carried out without power by a qualified electrician.
Material and Finishes
Plastic Material
The part is made of plastic. The aluminum finish does not mean it is made of metal.
Aluminum Finish
An aluminum appearance to visually complete your SH1 installation.
Matte Black Finish
A second finish offered on this product sheet, to be selected according to the desired appearance.
Frequently Asked Questions
What is the difference between an inside and outside corner angle?
The inside corner angle corresponds to an inside corner, where the walls form a recess. The outside corner angle goes around a protruding corner. The two parts are not interchangeable.
Is it compatible with other trunking?
It is designed specifically for EUBIQ's SH1 trunking. Do not assume compatibility with another profile, even one with similar dimensions.
Is it made of aluminum?
No. Its material is plastic. The available finishes are aluminum and matte black.
Is the angle adjustable?
No. It is fixed at 90° and is suitable for inside corners matching this geometry.
How do I choose the finish?
Select the Alu or Black variant depending on your trunking and the other accessories, to maintain visual consistency.
Additional Information
A neat transition in the inside corners of your SH1 installation.
Fixed 90° inside corner angle · Aluminum or matte black finishes| Characteristic | Value |
|---|---|
| Subject | Plastic |
| Finishing | Aluminum / Matte Black |
| Attachment type | Surface-mounted |
| Brand | EUBIQ |
| Reference | 5011-0404-0500 |
FAQ7 Questions
FAQ – SH1 EUBIQ Trunking Inside Corner
What is the difference between an inside corner and an outside corner?
The inside corner is designed for recessed corners, where the walls form a hollow. The outside corner is intended for protruding corners. The two parts are not interchangeable.
Which trunking is it compatible with?
It is designed exclusively for the SH1 EUBIQ trunking. Do not assume compatibility with another model or brand, even if the dimensions are similar.
What material is it made of?
The part is made of plastic. It is available in an aluminum or matte black finish. The aluminum finish describes its appearance and does not mean that it is made of metal.
Is it adjustable?
No. The corner is fixed at 90°. Check that this geometry matches the recessed corner of your installation.
What dimensions are indicated?
The part measures H 10.2 cm × D 3.7 cm. The indicated weight is 100 g and the packaging dimensions are 15 × 15 × 15 cm.
How to install it?
Position the first SH1 section up to the recessed corner, snap the corner into place without forcing it, then connect the second section perpendicularly. Check the alignment and fastening, then complete the assembly according to the system documentation. All electrical work must be carried out when the power is off by a person qualified in electricity.
How to choose the finish?
Select the Alu or Black variant according to your trunking and the other accessories to maintain a uniform appearance.
Additional articles
WHAT OUR CLIENTS SAY ABOUT US
Discover below the reviews left by our hundreds of satisfied customers. These reviews come from verified buyers, and are controlled and verified by Judge.me, acting as a trusted third party between Eubiqeurope and its customers.
Rien à dire
Rapide efficace.
Prise que nous connaissons, pratique et fiable
Matériel très bien emballé, facile de pose. Livraison annoncée sous 8 jours mais livré en 4. Très content de ma commande.
Entièrement satisfait de ces produits, livraison rapide, montage facile.
De mme que pour le rail, jolie prise facile d'utilisation qu'on peut activer ou dsactiver
Excellente qualit du matriel en alu bross, facile monter. j'en suis trs content
10sur10.
Parfait
Parfait
Produit de très bonne qualité. La prise de courant avec led bleu apporte une très belle touche de modernité.
Produit de trs bonne qualit
La prise de courant avec led bleu apporte une trs belle touche de modernit
Ravis que la marque ait reprise la vente des goulottes! Un rsultat quasi parfait! Bricoleur amateur, seul conseil pour un ajustement parfait, un trs lger ponage des bords au papier sec 600 pour liminer l'bavurage
Une notice d'installation claire et simple mettre en oeuvre
Are you a professional ?
Electrician, fitter, furniture maker, kitchen designer...Apply for your professional account now to benefit from your conditions.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.